Installation

All Versatrac components are carefully wrapped and suitably protected at the factory for shipping. Frame headers and jambs are packaged separately, carefully marked for tag openings to assure fast, trouble-free installations.

Versatrac Systems are usually installed by a drywall or finish-out contractor. They require no on-site finishing.

Installation Types

Quick Mount

• Recommended for use with unfinished panels. Door frame components are shipped knocked down, with factory-installed stud segments of extruded aluminum.

Basic

• Recommended for use with factory finished wallboard. Components are shipped unassembled and include separate full-length aluminum studs.

Maintenance

• Painted surfaces may be cleaned with the same techniques used for any interior painted surface. General cleaners such as Formula 409®, and mildly ammoniated cleaners, such as Windex® with Ammonia-D or Lestoil® may be used with a soft cloth for periodic maintenance.
• For minor retouching over the life of an installation, matching enamels are readily available.
• Anodized frames should be wiped regularly. If cleaning is necessary, apply mild detergent (such as Dawn® Dishwashing Liquid) in a warm water solution. Use a soft, lint-free cloth, rinse immediately and wipe dry.
• Smudges may usually be removed with a thin, clean oil and a soft, dry cloth.

Contact Versatrac

If you need more information or would like to place an order, please contact:

800-395-2014

713-681-8231

Fax 713-681-6198

Frances@versatracframes.com

Melba@versatracframes.com

Mailing Address:

7967 Blankenship Drive
Houston, Texas 77055